Predicting the yield ratio of reversion annealed austenitic stainless steels

Mehdi Shaban Ghazani¹ Hesam Asghar Rezaei²

Abstract :
In the present study, the AISI 321 austenitic stainless steel was cold rolled and annealed at 700, 800, and 900 ͦC for 15 min to obtain different microstructures. After annealing, tensile tests were conducted at ambient temperature and the yield ratio was calculated using the engineering stress-strain curves. Also, the yield ratio of samples with different initial microstructures was predicted using the material constants of Hollomon and Voce equations. The results of microstructural analysis showed that the initial microstructure after annealing at 700 ͦC is consisted of elongated austenite grains with high dislocation densities and the ultrafine grains obtained as a result of inverse transformation of martensite to austenite phase. Also, after annealing at 800 and 900 ͦC, the equiaxed microstructure of dislocation free grains is obtained. It is concluded that after annealing at 700 ͦC, the minimum work hardening exponent (nmin) obtained from ∂lnσ/∂lnε curves can be used successfully to predict the correct YR using the Hollomon equation. In this condition, the austenite to martensite transformation is suppressed during tensile testing. Whereas, the austenite to martensite transformation occurs during tensile testing of samples annealed at 800 and 900 ͦC, and results in the increase of strain hardening exponent with applied strain. In this case, the correct YR can be predicted using the average work hardening exponent (navg) determined from ∂lnσ/∂lnε curves. The constants of Voce equation were also calculated and used to predict the YR of austenitic stainless steels. Results indicate that the YR of AISI 321 austenitic stainless steel at different initial conditions can be predicted accurately using the constants of Voce equation.

Keywords : aisi 321 steel work hardening exponent yield ratio voce equation hollomon equation

---

زبان مقاله : انگلیسی
محور مقاله : مهندسی مواد
محل انتشار : سومین کنگره بین المللی مهندسی، فناوری و نوآوری
آدرس وب سایت کنفرانس : eticong.com/3rd
کد IOI مقاله : XDHC-FECKE
لینک مستقیم مقاله : https://isnac.ir/XDHC-FECKE
نمایش چکیده فارسی : https://isnac.ir/SA/XDHC-FECKE

سایر مقالات ارائه دهنده

1. Processing of 7075 aluminum based composite using a combination of hot pressing and accumulative roll bonding
2. Impact of grain refinement on electrochemical behavior of ferritic stainless steel in alkaline solution
3. Deformation characteristics of AA6063 alloy during ECAP in parallel channels
4. Tow dimensional finite element analysis of the cross channel angular pressing (Cross-ECAP)
5. Finite element simulation of ECAP with double curvature
6. Predicting the yield ratio of reversion annealed austenitic stainless steels

سایر مقالات محل انتشار

1. بررسی تنش اعضای ساختمان فولادی دارای ابربادبند در هنگام خرابی پیشرونده
2. راهکارهای حفظ و مدیریت منابع آب و جلوگیری از ایجاد خشکسالی(منطقه مطالعاتی استان کردستان)
3. سیستم های متداول سازه¬ای در ساختمان های بلند
4. استخراج خواص درون پالس سیگنال گسیل کننده رادار مبنی بر تجزیه حالت تجربی
5. The effect of steel coatings on the reinforcement of high strength concrete beams
6. EFFECTS OF INCREASING BAFFLE’S DEFLECTION ANGLE ON HEAT EXCHANGERS
7. ساختار کلی انرژی خورشیدی سلول های خورشیدی (فتوولتائیک) و پنل های خورشیدی
8. نقش فناوری اطلاعات و ارتباطات در توسعه کشاورزی هوشمند
9. بررسی ضخامت بهینه دیوار با رویکرد حرارتی در سیستم ساختمانی ICF
10. Evaluation of water quality of Mahabad Ardestan, agricultural wells in terms of drinking standard
11. ارزیابی ریسک سلامت فلزات سنگین در منابع آب با تأکید برشاخص آژانس حفاظت محیط زیست(EPA)
12. Ecommerce: Digital marketing success by customer experience
13. Customer Relationship Management (CRM) in the State-of-the-art Internet Services
14. Effect of loaded frankincense extract on polymer and solid lipid nanoparticles on an animal model of Alzheimer s
15. The effect of impeller blades number on the performance of a centrifugal pump with complete and trimmed impeller