Processing of 7075 aluminum based composite using a combination of hot pressing and accumulative roll bonding

Keyhan Hosseinnejad¹ Beitallah Eghbali² Mehdi Shaban Ghazani³

Abstract :
In the present investigation, the combination of a single pass hot-pressing and two passes of accumulative roll bonding was employed for fabrication of the 7075 aluminum based metal matrix composite. For this purpose, as received strips were cut into desired dimensions and after surface treatment, 0.8 vol. % SiC particles were uniformly dispersed between the four strips. Afterwards, a single pass hot pressing and 2 passes of accumulative roll bonding were carried out at 640 K. The microstructure and mechanical properties of processed samples were evaluated by OM, SEM, EDXS, XRD, tensile testing and micro-hardness measurements. Microstructure observations clearly showed that after single pass hot pressing and two passes of accumulative roll bonding, the reinforcement particles were dispersed uniformly in the matrix and perfect bonding is achieved between matrix and reinforcement particles. The results of tensile testing revealed that the tensile strength of processed composite is 2.1 time higher than the tensile strength of as-received material. It was deduced that the dislocation strengthening and grain refinement are the main strengthening mechanisms.

Keywords : aluminum based composite mechanical properties microstructure hot pressing and accumulative roll bonding

---

زبان مقاله : انگلیسی
محور مقاله : علوم مهندسی
محل انتشار : کنفرانس بین المللی مهندسی و تکنولوژی - نروژ
آدرس وب سایت کنفرانس : icetconf.com
کد IOI مقاله : XBKC-ECKZG
لینک مستقیم مقاله : https://isnac.ir/XBKC-ECKZG

سایر مقالات ارائه دهنده

1. Processing of 7075 aluminum based composite using a combination of hot pressing and accumulative roll bonding
2. Impact of grain refinement on electrochemical behavior of ferritic stainless steel in alkaline solution
3. Deformation characteristics of AA6063 alloy during ECAP in parallel channels
4. Tow dimensional finite element analysis of the cross channel angular pressing (Cross-ECAP)
5. Finite element simulation of ECAP with double curvature
6. Predicting the yield ratio of reversion annealed austenitic stainless steels

سایر مقالات محل انتشار

1. Factors Affecting Health with Emphasis on Health Care Economic Costs
2. الگوی رفتاری فرو رفت شمع های پیش ساخته به نسبت تعداد ضربات در مقایسه با مقاومت خاک
3. بازطراحی محلات مسکونی با تمسک بر تغییر الگوی سکونت (نمونه موردی: محله خرمشهر واقع در منطقه 8 مشهد)
4. A New Approach for Music Generation with LSTM and K-means Clustering Algorithm
5. Effect of Ozonation on Microbial Properties of Rice Flour
6. Measuring of phytochemical and antioxidant compounds and identification of main phenolic compound in Anarijeh plant(Froriepiasubpinnata) extract by RP-HPLC method
7. بهسازی بافت روستایی با رویکرد توریست پذیری و گردشگری روستایی (نمونه موردی: روستای توئیجن همدان)
8. A Model for Increasing Electronic Payment Tendency (EPT) using Gamification
9. Enhancement mechanical strength of epoxy nanocomposites by Tannic acid/graphene oxide
10. تاثير پوشش گياهي در صرفه جوئي مصرف انرژي ساختمان
11. تشخیص بیماری Amd با استفاده از منطق فازی
12. تشخیص میزان مدت بقای بیمارانی که به دلیل سرطان سینه تحت عمل جراحی قرار گرفته اند با استفاده از الگوریتم خوشه بندی فازی
13. شناسایی ژن های بدخیم در سرطان سینه با استفاده از طبقه بندی کننده تابع پایه شعاعی
14. Seismic Behavior of New Lateral Bracing Systems Called “OGrid” and “Nested” in Mid-rise Buildings
15. Seismic Performance Investigation on an Innovative Lateral Bracing System (OGrid) in Tall Buildings