2D perovskite solar cells and layering with 2D and 3D materials

Mehran Hosseinzadeh Dizaj¹

Abstract :
In perovskite solar cells, which are sub-branches of Nano, the biggest challenge facing every researcher is their stability. As we know, perovskites have a cheaper manufacturing process than silicon solar cells, but due to the lack of proper instability, they still cannot be used as the right option in the solar panel industry. The materials used in the manufacture of perovskite solar cells are the biggest factor in their instability, because these materials are destroyed due to the reaction with the ambient air and humidity. In this research, it has been tried to use organic substitute materials that have a good place in chemistry and physics and compare their efficiency with standard perovskites.

Keywords :

---

زبان مقاله : انگلیسی
محور مقاله : مهندسی برق
محل انتشار : اولین کنگره بین المللی علوم، مهندسی و فن آوری های نو
آدرس وب سایت کنفرانس : secongress.com/1st
کد IOI مقاله : XEHE-HCGFE
لینک مستقیم مقاله : https://isnac.ir/XEHE-HCGFE
نمایش چکیده فارسی : https://isnac.ir/SA/XEHE-HCGFE

سایر مقالات ارائه دهنده

1. انواع ترانزيستور هاي اثر ميداني، بررسی عملکرد و تفاوت آنها
2. بهينه سازي پروتکل های مسیریابی و نحوه پیاده سازي و عملكرد آنها در شبکه های مخابراتی
3. انواع ترانزيستور هاي اثر ميداني و تفاوت آنها با ترانزيستور هاي دو قطبي
4. بررسی و مقایسه سلول‌های خورشیدی فتوولتاییک و پروسکایت
5. تاثير هوش مصنوعي در علم رباتيك
6. Design and implementation of grid-connected photovoltaic power plant with the highest technical Efficiency
7. طراحی و شبیه سازی سلول های خورشیدی پروسکایت در نرم افزارScsaps با ZnOو گرافن
8. 2D perovskite solar cells and layering with 2D and 3D materials
9. Design and construction of single cation perovskite solar cell and its stability in a solar cell system and their efficiency
10. Design and simulation of perovskite solar cells with ZnO and graphene
11. Increasing the efficiency of perovskite solar cells using graphene doping in the ETL layer
12. Layering of perovskite layer in a non-moving way using a sampler on a spin cutter inside the glove box
13. Innovative use of tandem solar cells (silicon perovskite) in satellites and spaceships to increase the efficiency and life of their electrical systems in space outside the atmosphere.
14. Enhancing Perovskite Solar Cell Durability: innovative waterproofing using PTFE and PVDE polymer materials simultaneously
15. Investigating the structure of perovskite solar cells and its effect on improving the space industry and satellites

سایر مقالات محل انتشار

1. اثرات طراحی سبز در طرح توسعه مجموعه آموزشی - دانشگاهی با رویکرد مدیریت سبز
2. بررسی توان های محیطی در ارتقا خدمات گردشگری کشورهای پسانفتی با تاکید بر پایداری اقتصادی (نمونه موردی: جزیره هندورابی)
3. Simulation, Analysis and Evaluation of Fracture Mechanics of Aluminum Sheet Forming Process with Rubber Substrate
4. Simulation and Analysis of the Cutting and Drilling Process of the Human Skull Bone with Water Jet Process Using Finite Element ABAQUS Software.
5. Simulation of Impact hard object on Knee Joint and Investigation of stress on it Using Finite Element Method
6. Numerical Investigation, Prediction and Comparison of Ductile, Shear and MSFLD Damage Model in Cross-Shape Tube Hydro-Forming Process
7. Simulation and Evolution of a New Seismic Flexural Connection System for Steel Structures
8. Investigating the Effect of Cuo nano-particles on the Hydrodynamic Properties of the Non-Newtonian Fluid (water + CMC) Inside the Tube, With the Boundary Condition of Uniform Velocity at the Inlet Section and Under Constant Thermal Flux in the Laminar Flow Range
9. Preparation of Silicon Carbide Refractory Coating by Chemical Vapor Deposition Using Hexamethyldisilylamine Precursor.
10. Presentation of Proposed Model for Zero Carbon Buildings Based on Commercial Models
11. Evaluation of Fatigue Phenomenon Effect in Polyvinyl Chloride Pipes Under Reversible Cyclic Loads
12. Measuring the Rate of Carbon Dioxide Production Due to the Effect of Humidity on the Optical Degradation of Polyvinyl Chloride and Polyethylene
13. The Effect of Additive Elements on Surface of Polyvinyl Chloride and investigation of its Floatability properties
14. Evaluation of the Effect of Zn3(C3N3O3)2. ZnO as a Thermal Stabilizer on Polyvinyl Chloride
15. Investigation of Mechanical and Thermal Properties of Flexible PVC-EBSO